.jpg)
Functions
The following are some of the features that make the HD Conference Dome the perfect fit for a variety of conference applications.
Network-based control and configuration The HD Conference Dome enables full camera control and configuration capabilities over the network.Operators or technicians can control camera pan/tilt/zoom operation, and presets virtually anywhere without need for additional wiring.
The embedded web server lets the installer access all the user settings, make camera adjustments, and update firmware via a standard web browser or via the Bosch Video Management System.
Device management
Simple Network Management Protocol (SNMP) support facilitates the remote monitoring and management. The HD Conference Dome provides full support for SNMP v3.
Ease of installation and servicing
The HD Conference Dome has been designed for quick and easy installation. The dome comes fully assembled and ready for surface mount applications. Also available are wall, recessed, and pipe mounting kits which allow the HD Conference Dome to be easily adapted for the individual site requirements.
Power over Ethernet
Power for indoor camera models may be supplied via a Power over Ethernet Plus (PoE+, IEEE 802.3at, class 4) compliant network cable connection. With this configuration, only a single cable connection is required to power and to control the camera while also monitoring images from the camera via the web server. An additional coax cable is required for the video from the HD-SDI output.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Technical specifications
10x HD Camera
Imager 1/2.5 inch progressive scan CMOS
Number of Pixels 2.1 Megapixels
Aspect Ratio 16:9
Lens 10x optical zoom (6.3 to 63 mm)
(F1.8/F2.5 to close)
Focus Automatic with manual override
Iris Automatic with manual override
Field of View Horizontal: 5.5° to 50.6°
Vertical: 3.1° to 29.3°
Automatic Gain Control Normal, Medium, High, Fixed
Synchronization Internal
Aperture Correction On/Off
Digital Zoom 16x
Sensitivity(typical)1 30 IRE2 50 IRE2
Day Mode
SensUP Off 1.2 lx 2.0 lx
SensUP On (64x) 0.038 lx 0.063 lx
Night Mode
SensUP Off 0.06 lx 0.1 lx
SensUP On (64x) 0.0018 lx 0.0031 lx
Electronic Shutter Speed
(AES)
1x to 64x; 1/50 (1/60) to 1/10000
Signal to Noise Ratio > 50 dB (AGC off)
Backlight Compensation On/Off
White Balance ATW, Indoor, Outdoor, AWB Hold,
Extended ATW, Manual
(adjustable R and B signals in Manual
mode)
Day/Night Monochrome, Color, Auto
1. F1.8, 1/30 (1/25) shutter, maximum AGC.
2. Tinted bubble adds 0.8 f-stop loss.
Software Control
Camera Configuration Via Internet Explorer Web browser
version 7.0 or later or Bosch
Configuration Manager
Software Update Firmware upload
Video
HD-SDI
Standards SMPTE 292M
Resolutions (H x V) and Frame Rates
• Full HD/1080p 1920 x 1080, 30 ips
• HD/720p 1280 x 720, 60 ips
Data Rate 1.5 Gbit/s
Video Delay 10 ms
Network Stream
Standards H.264 (ISO/IEC 14496‑10), M‑JPEG,
JPEG
Streaming Individually configurable streams in H.
264 and M‑JPEG, configurable frame
rate and bandwidth;
• 1080p30 One (1) H.264 1080p30 stream plus
one (1) M‑JPEG and one (1) I-frame
stream
• 720p60 One (1) H.264 720p60 stream plus
one (1) M‑JPEG and one (1) I-frame
stream
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms
Resolutions (H x V) and Frame Rates
Stream 1
• Full HD/1080p 1920 x 1080, 30 ips
• HD/720p 1280 x 720, 60 ips
Stream 23
• SD/480p (WVGA)4 854 x 480, 30 ips
• SD/240p (WQVGA)4 432 x 240, 30 ips
4 | HD Conference Dome
