.jpg)
Features
• 10-pin modular lockable connection for MXC-series gooseneck microphones
• 4.3 inch color touchscreen displays user controls, voting or meeting information
• Built-in loudspeaker remains on when microphone is activated
• Speak and mute/function buttons with LED status indicators
• NFC ID card slot for participant identifi cation
• Dual 3.5mm headphone jacks with volume controls
• SB930 removable rechargeable Li-Ion battery (included) provides over 11 hours of runtime
Specifications
AUDIO INPUTS
Microphone Input
Nominal Input Level -60dBV Equivalent to 80dBSPL at the MXC416/420 capsule when speaking at a 30cm distance.
Maximum Input Level -1.5dBV 1% THD+N measured at MXCWAPT Dante Output. Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB. Microphone transducer not included in measurement.
Frequency Response 20Hz - 20kHz (+0.5dB/-3dB) Measured at MXCWAPT Dante Output. -45dBFS input, Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB. Microphone transducer not included in frequency response measurement.
Total Harmonic Distortion + Noise 0.04%, typical Measured at MXCWAPT Dante Output. -6dBFS input, 1kHz, Mic Gain = -30dB (AGC Disabled),
MXCWAPT Dante Output Gain = 0dB, 22Hz - 22kHz BW. Microphone transducer not included in
THD+N measurement.
Dynamic Range 112dB (A-weighted), 110dB (unweighted), typical Measured at MXCWAPT Dante Output. Mic Gain = -30dB (AGC Disabled), MXCWAPT Dante Output Gain = 0dB, 22Hz - 22kHz BW. Microphone transducer not included in dynamic range measurement.
Preamplifi er Equivalent Input Noise -117dBV (A-weighted), typical 22Hz - 22kHz BW
Input Impedance 26kΩ
Confi guration Unbalanced
Speaker Output
Nominal Output Level 72dBSPL at 0.5m Measured with an SPL meter using A-weighting and fast averaging
Maximum Output Level 89dBSPL at 0.5m 3% THD+N
Frequency Response 220Hz - 15kHz (±10dB) Audio Injected at MXCWAPT Dante Input. -6dBFS input, MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB. Speaker transducer was included in frequency response measurement.
Total Harmonic Distortion + Noise 1%, typical Audio Injected at MXCWAPT Dante Input. -6dBFS input, 1kHz, MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB, 22Hz - 22kHz BW. Speaker transducer was included in THD+N measurement.
Dynamic Range 94dB (A-weighted), 91dB (unweighted), typical Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Speaker Gain = 6dB, 22Hz - 22kHz BW. Speaker transducer was included in dynamic range measurement.
Headphone Outputs
Maximum Output Level 2.1dBV 1% THD+N. Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB. Headphone transducer not included in measurement.
Frequency Response 100Hz - 20kHz (+0.5dB/-3dB) Audio Injected at MXCWAPT Dante Input. -6dBFS input, MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB. Headphone transducer not included in frequency response measurement.
Total Harmonic Distortion + Noise 0.04%, typical Audio Injected at MXCWAPT Dante Input. -6dBFS input, 1kHz, MXCWAPT Dante Input Gain = 0dB,Headphone Gain = 0dB, 22Hz - 22kHz BW. Headphone transducer not included in THD+N measurement.
Dynamic Range 101dB (A-weighted), 99dB (unweighted), typical Audio Injected at MXCWAPT Dante Input. MXCWAPT Dante Input Gain = 0dB, Headphone Gain = 0dB, 22Hz - 22kHz BW. Headphone transducer not included in dynamic range measurement.
Load Impedance >8Ω, typical Headphone outputs are protected against short circuits
Confi guration Dual mono Will drive stereo and mono headphones
Type TRRS 3.5mm Female Socket
RF
WLAN Standard IEEE 802.11a,g
RF Frequency Bands 2.4GHz ISM / 5GHz UNII
Sensitivity -75dBm at 10%PER
Output Power 1mW (Low), 3mW (Medium), 6mW (High), 10mW
(Maximum)
Antenna Type Proprietary Internal Bi-level Dual-Band PIFA
POWER
Battery Type Shure SB930
Battery Connector Proprietary blade
Battery Chemistry Lithium-Ion
Battery Voltage 3V - 4.2V
Battery Capacity 35Wh
Power Consumption 3W, typical
Operating Time >11 hours, typical
Charging Time 6 hours, typical (via USB connection)
